CONSTRUCTION CHEMICALS & FIRE PROTECTION

Handi-Seal Window and Door Sealant
Specially formulated for window and door applications. Handi- Seal provides superior thermal insulating properties in comparison to traditional building materials, such as fiberglass, mineral fibre and caulk. Polyurethane foam is the most effective seal for window and door installation. Foam expansion does not cause bowing. Foam pressure during and after expansion is the main cause of potential bowing problems. Handi-Seal is a closed-cell, technically advanced polyurethane foam that exerts about 85% less pressure while maintaining all the benefits of traditional higher-pressure polyurethane foams. Window manufacturers have observed the benefits of Handi-Seal low pressure foam.

Recommended uses
Apply Handi-Seal Window and Door Sealant onto any clean surface to fill, insulate and seal around windows, door frame joints, beneath base plates, mud sills, top plate penetrations, corner joints, T-joints, exterior cracks, around utility panels, pipes, duct penetrations, etc. It is specifically designed to be dispensed as a bead for filling cracks, crevices and to fill smaller cavities on flat or irregular surfaces.

Features
• Low Expansion Pressure - will not bow windows
• Easy to Apply
• Reduced Time & Labor - pressurized can
• Thermal Insulation - closed cell foam
• Dimensional Stability - will not shrink/expand once cured
• Distinctive Gray Color
• Easily distinguishable from typical foams
• Tack-free in less than 5 minutes
• Sound dampening and noise reduction
• Good flow in low temperature environments

FomoPlus
Self-expanding, one-part, CFC free polyurethane foam for use with an applicator. FomoPlus is used with an applicator gun, which ensures accurate and neat application of the polyurethane foam. FomoPlus expands on application to seal, fill and insulate large gaps between most common building materials. Recommended uses
• Sealing gaps between partitioned areas to control air flow
• Window setting (where a clean and controlled backfill is required).
• Sealing gaps to block out dust, noise, drafts and vermin
• Sealing pipe penetrations through walls and floors
• Set building
• Any kind of small breakthroughs in walls and other cavities.

Features
• Expands to completely fill voids
• Closed cell foam structure - efficient temperature insulation
• Applicator provides neat, accurate dispensing
• Reusable
• Ozone friendly – CFC, FC and HFC free
• Resistant to blockages – ideal for stop / start work

FomoFill
A self-expanding polyurethane foam suitable for use straight from the can without mixing. FomoFill seals, fills and insulates large holes in most common building materials.

FomoFill reacts with moisture in the air causing it to expand to fill any shaped hole or cavity. The cured foam can then be cut or shaped and painted as desired. FomoFill’s unique postion dispensing system allows the can to be held at any angle during application. No need to hold the can upside down.

Recommended uses
FomoFill is ideal for filling:
• Large holes
• Pipe penetrations through walls and floors
• Larges gaps or holes between walls and floors
• Gaps between joists and window and door frames
• Patching large holes prior to painting

Features
• Fill big holes
• Once cured, can be cut and shaped as required
• Non-shrink
• Can be dispensed with can at any angle - great for hard to reach holes
• Can be sanded, filled and painted to produce a neat finish
• Excellent insulator
• CFC free