Ramset™ Spring Toggles have a wide wingspan to give high loadings in both plasterboard wall and ceiling applications.

No protruding flanges allow for ultra flush fixing (Countersunk and Round head only).

Low profile round or countersunk screw heads suit various fixture recesses.  Handy hook profile also available.

1. Drill the recommended sized hole through the plasterboard.

2. Pass the screw through the fixture and into the toggle for a few turns. Compress the toggle wings and insert the anchor into the hole. The wings will spread behind the cavity wall.

3. Pull back on the fixture to hold the toggle in place against the reverse side of the cavity wall and tighten with a screwdriver, pulling the wings of the anchor firm against the cavity wall.