DynaBolt™ Decorative Post Heads
|
|
DynaBolt™ Decorative Post Heads may be fitted to Hex Nut DynaBolts to provide a tie wire head or a more decorative finish. |
|
SPECIFICATIONS
Material
|
Carbon Steel, Stainless Steel 316 (A4) |
| Corrosion Protection |
Zinc Plating |
| Head Styles |
Countersunk/Flat Head, Round Head, Tie Wire
|
| Thread Diameters |
M4.5, M6, M8, M10 |
| Drilled Hole Diameters |
6mm, 8mm, 10mm, 12mm |
|
|
|
FEATURES & BENEFITS
|
DynaBolt™ Decorative Post Heads provide added flexibility to DynaBolt™ Plus Sleeve Anchors, providing a range of alternative head styles for different applications.
|
|
|
INSTALLATION GUIDE
|
1.Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
2.Insert the DynaBolt™ Plus through the fixture and drive with a hammer until the washer contacts the fixture.
3.Tighten the DynaBolt™ Plus, allowing the sleeve to twist and pull down the fixture firmly onto the substrate. For optimum performance, a torque wrench should be used.
|
|
|
TECHNICAL DATA & DOCUMENTS
|
RANGE Select product to view details
Countersunk Stainless Steel Grade AISI 316 (A4)
