Threaded Insert
|
|
Threaded Inserts are steel threaded sockets that sit flush with the concrete surface and allow use of various head style bolts. Available in zinc plated carbon steel or high corrosion resistant ASIS 316 (A4). Bolts can be removed and reinstalled later - ideal for event seating, hand rails, safety barriers. |
|
SPECIFICATIONS
|
Typical Properties
| Steel Grades |
500 MPa Carbon Steel
AISI 316 (A4) Stainless Steel |
|
|
|
FEATURES & BENEFITS
- High Performance Grade 5.8 Carbon Steel
- Zinc Plated for indoor or dry climates
- High Performance AISI316 Stainless Steel for Coastal or fresh water Applications
- Supplied with protective cap to protect threads during installation
- Allows choice of various bolt head styles
- No trip hazard when bolt removed
- Ideal for removable fixtures
|
|
|
INSTALLATION GUIDE
|
1. Drill or core hole to specified diameter and depth
2. Remove dust and debris by brushing and blowing 3 times each (If hole is wet or flooded, consult adhesive product information to determine its suitability for this condition)
3. Screw mixing nozzle onto cartridge and dispense 2-3 trigger pulls of adhesive to waste until colour is grey with no streaks
4. Insert tip of nozzle to bottom of hole and dispense adhesive
5. Fill hole to about 2/3 full
6. Insert threaded insert with rotating motion to release trapped air
7. Wait until adhesive has fully cured before loading (see Working / Loading Time chart for each adhesive)
Refer to Technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
